Mounting Router On Wall. Keep a distance of 270 mm between two holes on an ar1200 series routers. It will stick there securely for the next task.
Place it on the intended spot. Measure out with your router where the screws have to go. Keep a distance of 130 mm between two holes on an ar150/160/200 series routers.
All Keenetic Router Models Have A Wall Mount Option.
Keep a distance of 270 mm between two holes on an ar1200 series routers. Re:effects of wall mounting an ac4000 or ax6000. Routers tend to spread signals downward, so it's best to mount the router as high as possible to maximize coverage.
Drill Holes And Install Mounting Screws.
After removing a little bit of material from around the edge of the head of two long screws, i have the router on the wall. Choose an appropriate drill bit according to the diameter of the mounting screws. Rax120 does not have mounting holes.
Also, Ensure That The Location Is Near An Electrical Outlet.
There are two holes on the back of the case. Insert screws into the wall anchors. Hold the router with the heat warning label upright.
Nowadays, Routers Are Using More Powerful Processors Which Might Get Hot While Using, This Technique Of Mounting Will Bloc.
Insert screws into the wall anchors, leaving 3/16 in. Make sure that the wall you are going to use is smooth, flat, dry and sturdy. Wait 12 hours for the adhesive to dry.
For Best Wireless Performance, Position The Wireless Antennas As Shown With The Top One Facing Up And The Bottom One Facing Away From The Router.
I'd recommend the plywood method of mounting myself. Squeeze adhesive from the provided tube into the larger hole until you can see the adhesive in the smaller hole. Free shipping on orders over $25 shipped by amazon.